DGPS224(JLR-4341)
7/20
(3) When DGPS sensor attached to poles with cut male screws, round off the corners. See below.
(4) When performing attachment, always hold and turn the sensor base. Holding and turning the
radome may result in a large amount of force applied at the junction of the base and the
radome, resulting in damage to the sensor.
Do not apply force to the joint.
Hold and turn the base.
1”14-UNS
－
2A
About 25mm
round off the corners
Radome
Base
Joint
Fig. 3-5 How to attached to poles and work example
Fig. 3-6 Attention at installation