32 | Operation
2.3 DP Workstation
The DP Operator Workstation is operated with a Trackball for pointing, or with the function selection keys on the TFT
screen. Each graphic display is called a “screen” and displays settings and system information as numeric values or as
graphic animation. Numeric system information is printed in white, while changeable settings are displayed in yellow.
Double click on a yellow number to change settings and enter a new value in the dialog that appears.
Click on the OK button to confirm the setting.
Each tab at the top of the screen displays a screen for a specific function. The following functions can be selected:
1. Map (Figure 20: DP MAP Screen on page 32)
2. Tracking (Figure 29: Tracking Screen on page 39)
3. PMS (Figure 34: PMS Screen on page 43)
4. Capability (Figure 35: Capability Screen on page 44)
5. Sensors (Figure 36: Sensor Screen on page 45)
6. Position (Figure 37: Position Screen on page 47)
7. Follow (Figure 39: Position Screen (F.U.) on page 50)
8. Simulation (Figure 41: Simulation Screen on page 52)
2.3.1 Map
Select the MAP screen by pressing the tab at the top of the screen. The basic layout of this screen is as follows:
Figure 20: DP MAP Screen
Summary of Contents for Alphatron Marine AlphaDynaPos
Page 1: ...AlphaDynaPos Ship Automation and Navigation system Operation Manual www jrc am ...
Page 5: ...5 Contents 4 2 Appendix B Checklist for Taking DP system into Operation 85 ...
Page 13: ...13 Introduction III 3 System Overview DP2 Figure 2 system Overview DP2 ...
Page 14: ...14 Introduction III 4 Sensor Overview Figure 3 Sensor Overview ...
