Note If Error log or Events log icon is pressed without the connection to the Unit, the error message will be
reported and the last list is read from the Project folder stored to the PC (if any).
Both Error and Action log files are saved on program/Config-folder of the project. Example:
C:\Program files\Audico Oy\Audico AVEC\PROJECTS\Default_Project\Config\ErrorEvents.txt
C:\Program files\Audico Oy\Audico AVEC\PROJECTS\Default_Project\Config\ActionEvents.txt
4.3.13 Direct System Commands from PC
•
Monitor on / Monitor off
If system monitoring is activated it can be disabled for service use by double clicking “Monitor on”. This text is located
into the right bottom-edge of PC screen. Double click on the text will activate it again. System will remain on normal
operation mode after power off or reset.
•
Active / Standby
System can be set to Active or Standby-mode by double clicking the text.
65 | AlphaAnnounce Software Configuration
