•
Loading procedure prompts user “Do you want to send to slave units also?” Click Yes.
•
Configuration file is first uploaded to master DIGITAL AMPLIFIER System Unit
•
When uploading to master is completed it will set all slave units to stand-by mode and starts to upload the
configuration to those
•
Transmission through System Bus is slower than through USB-connection so uploading to slave units will take couple
of minutes depending on the size of the configuration
•
When uploading to slave units is completed system will restart with uploaded configuration and all program audio
routings are cleared
Note all units should have different address!
35 | AlphaAnnounce Software Configuration
