manualshive.com logo in svg

JRC Alphatron Marine AlphaAnnounce, Installation And Operation Manual

Share
Download
JRC Alphatron Marine AlphaAnnounce Installation And Operation Manual Download Page 45

Message volume determines the level for all pre-recorded messages. The control value is 0dB …. -40dB.

Master Level

Master volume is the overall volume for DIGITAL AMPLIFIER. The change in master volume changes the announcement
and stored message volume also. The control value is 0dB …. -100dB.

Default

As the presets have significance affect to the total capability of the sound response and level, it is necessary to do the
DSP-settings with a great care. Therefore there is a “Default” button in the Preset window’s bottom edge to load the
default settings as basic settings for a default. It is strongly recommended to use it, especially if the system contains any
LINE TRANSFER.

To get an impression of the audio input stage of each DIGITAL AMPLIFIER, take a look at the Block Diagram:

45  |  AlphaAnnounce Software Configuration

Summary of Contents for Alphatron Marine AlphaAnnounce













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands