JR XP662, Instruction Manual, Page: 58 / 88

58
XP662 MANUAL Helicopter
Accessing the Dual Rate Switch Selection Function
CHAPTER 6 : FUNCTIONS (SYSTEM MODE)
•
Helicopter
E.A
SW
INDICATES DUAL RATE SWITCH FUNCTION
INDICATES SWITCH POSITION
E.A = ELEVATOR AND AILERON OPERATE INDIVIDUALLY
A. = OPERATION OF ELEVATOR AND AILERON DUAL
RATE ON AILERON DUAL RATE SWITCH
E. = OPERATION OF ELEVATOR AND AILERON DUAL
RATE ON ELEVATOR DUAL RATE SWITCH
CF = OPERATION OF ELEVATOR AND AILERON DUAL
RATE ON FLIGHT MODE SWITCH
D/R
1. Press the SCROLL and INCREASE buttons
simultaneously and hold.
2. Turn on the transmitter to enter the system mode.
3. Press the SCROLL button until “D/R SW” appears
on the screen.
4. Press the INCREASE or DECREASE button until
the desired switch position or “CF” for “VTR”
appears on the screen. To adjust the dual rate
values see Section 7.2.
5. Press the SCROLL button to access the Ger/Gyro
Switch Selection function.
6. To exit, press the SCROLL and INCREASE
buttons simultaneously.
The dual rate switch position is selectable and the
elevator and aileron dual rates can be combined on
one switch. This allows a single switch to be used
when moving from high rates for wild maneuvers to
low rates for mild maneuvers. Exponential Rate (EXP)
is also available for both aileron and elevator and works in conjunction with the dual rate function to
provide mild control movements around neutral while
allowing maximum servo travel. This reduces sensitivity
in the middle portion of the stick control and still
allows full travel at the end of the stick control. Refer
to section 7.3 for exponential rate adjustment.
DUAL RATE SWITCH SELECTION
6.3
CHANNEL
SCROLL INCREASE
DECREASE
ENTER
Press the SCROLL button until
“D/R SW” appears on the screen. Press either the INCREASE or DECREASE
buttons until the desired switch position
appears on the screen.