P.18
Servo mount plate ( × 2)
Servo holding plate ( × 2)
HEX tapping screw M2.6 × 12 ( × 8)
A：Elevator servo
C：Pitch servo
● Use the rubber isolators supplied with the servos. Do not use the metal grommets.
● C: Pitch servo / Install the servo mounting plate prior to mounting the servo.
● Be careful when tightening the HEX tapping bolts. If they are too lose, the servo will move. Over
tightening will cause damage. The ideal position will dent the rubber grommets slightly.
● Be sure to note the proper orientation of the servos.
5-1 SERVO INSTALLATION 1
