P.15
Red
Red
(×
2)
※溝の部分に確実
にはめ込みます。
4-2
TAIL BOOM INSTALLATION
4-3
TAIL GEAR CASE ASSEMBLY
4-5
TAIL PC PLATE AND TAIL SLIDE RING ASSEMBLY
The tail boom now has a JR logo. There is no change to the assembly method.
The Tail gear case and Tail gear case plate L/R shape have been changed.
There is no change to the assembly method.
● Note the proper direction of the PC link. The side with
the four circle marks are toward the direction of the arrow.
Tail PC plate
Tail slide ring assembly
Tail slide ring sleeve
E stopper ring M1.5 ( × 4)
HG tail PC link pin ( × 2)
Setscrew M2 × 2 ( × 2)
Tail PC link ( × 2)
※ Note direction
※ When tightening, please note
this is reverse thread.
NOTE
※ fit the E rings into
the slots on the pin
