4-3
MAIN BLADE HOLDER/SEESAW AT TA C H M E N T
4-4
S E E S AW MIXING ARM INSTA L L AT I O N
2 1
3x16mm Socket Head Bolt
3x16mm Socket Head Bolt
........2 pcs
2x10mm Flat Head Screw
........4 pcs
3mm Flat Washer
........6 pcs
Nylon Washer
........4 pcs
Steel Joint Ball
........4 pcs
Blade Spindle Shaft
Dampner Rubber (2 pcs)
Blade Holder Spacer
(Bevel Inward) (2 pcs)
4mm Lock Nut (2 pcs)
3x5mm Button Head Bolt
(2 pcs)
Seesaw Shaft
Seesaw Spacer (Steel)
(2 pcs)
Use Red Threadlock
Seesaw Shaft
bushing (2 pcs)
* For Ergo 46 3D CCPM, please install
the Ball Bearing Seesaw Shaft.
Nylon Washer
3mm Flat Washers
Nylon Washer
3mm Flat Washer
3x16mm Socket
Head Bolt
Mixing Arm Bushing
Seesaw Mixing Arm
Steel Joint Ball
2x10mm Flat Head Screw
(2 pc)
Two Sets Required
Use Blue Threadlock
Note: If you are building the Ergo 46 3D CCPM version, please
install the Ball Bearing Seesaw Shaft Assembly, which is
included with your kit.
........2 pcs
Use Threadlock
Blade Holder Spacer A
........2 pcs
4mm Lock Nut
........2 pcs
Seesaw Spacer (Steel)
........2 pcs
........2 pcs
3x5mm Button Head Bolt
Use Red Threadlock
........2 pcs
Seesaw Shaft bushing
