Turn on the headset
Press and hold the answer button for 2 seconds. Release the
button when the purple LED flashes 3 times and
“Power on”
voice
notification is heard in the speaker.
Turn off the headset
Press and hold the answer button for 3 seconds. Release the button
when the purple LED flashes once and
“Power off”
voice notification
is heard in the speaker.
Turning the Headset On and Off
Answer button
Pairing
Prior to using the headset, it must be paired and connected to another
Bluetooth device, such as a mobile phone. For specific instructions,
check the user guide of your phone.
Pairing button
General procedure
• Turn on the Bluetooth function on your phone.
• Put the headset in pairing mode (make sure the headset
is switched on, press and hold the pairing button for
4 seconds until the blue LED flashes rapidly)
• Perform a search for Bluetooth devices on your phone.
• Connect to >>
BT-500D
<< when found.
• Blue LED is On and
“Connected”
voice notification is heard in the
speaker when pairing is completed.
Different smart phones have different ways to handle Bluetooth
devices. Read the user manual of your phone for more information.
Some phones will connect to the headset automatically when it
is within range, for example when you return to your office. For
other phones, it may be necessary to reconnect manually when the
connection has been broken.
The pairing mode is active for 3 minutes. After that, the headset will
enter standby mode. If you want to cancel the pairing mode, press
the answer button and then
“Pairing Cancel”
voice notification can
be heard.
