INSTRUCTION MANUAL CODE 80243 REV A
January/11
(It can be modified without notice)
Page: 41
J
.P. SELECTA s.a.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: [email protected] - website: http://www.jpselecta.es
Press
[RETURN]
to go back to pre-testing interface.
Note:
If you want to delete an equation, move the cursor onto it, and just press
[CLEAR].
Test and Print
When you have selected the equation, press
[START/STOP]
to go into testing
interface in pre-testing interface. (Fig. 19)
After blanking, pull the unknown sample cuvette in the light path, then press
[EN-
TER].
The testing result will be displayed on the screen.
Operation is the same if you want to test other samples.
Press
[PRINT]
to print testing results. (Fig. 20)
Figure 18
Figure 19
