17
18
15
16
Match your thermometer with a Smart Device
1. If this is your first time using it, bind first.Open
"
SETTING
"
menu,choose
“
Bind and unbind device" and select the
appropriate model.
The date and time on your thermometer will automatically be
updated when it's connected with your phone.
2. Confirm that your thermometer is connected successfully.
When your thermometer is connected successfully to your smart
phone, the “ ” symbol stop flashing and keep showing.
Transfer your readings
1. As soon as your measurement is finished, open the app on
your smart phone to transfer the readings.
Note: On the matched smart phone, Bluetooth must be enabled.
2. You can view your temperature readings in the app.
Illustration For Use
Bluetooth requirements
The thermometer requires a bluetooth device with:
. Bluetooth 5.0 or later
. Android 6.0 or later
. IOS 10.0 or later
And works with:
. iphone , iPod, iPad
. Android Phones and Tablets
Using for the first time
1. Download the "JoyHealth" App from Website or APP Store (Such
as Apple Store).
2.Open the App on your phone or tablet. If requested, you should
enable Bluetooth on your device. You can enable Bluetooth under
the Settings menu on your smart phone or tablet.
3. Create a new user login, or login with your existing user name and
password.
4. Selection device “Thermometer”.
Illustration For Use
After measurement:
1. Power off: Device will automatically shut off if left idle for
more than
to extend battery life.
2. Clean the probe after each use to ensure an accurate reading and
avoid cross contamination.
(See the section of Care and Cleaning for details.)
30 seconds
BackLight:
In Forehead mode:
1. The display will be lighted
for 3 seconds when the unit is
ready for measurement and the display will be lighted GREEN for
3 seconds when a measurement is completed with a reading less
than 37.3 (99.1 ).
2. The display will be lighted YELLOW for 3 seconds when a
measurement is completed with a reading less than 37.8
℃
(100.0 ).
3. The display will be lighted RED for 3 seconds when a measurement
is completed with a reading equal to or higher than 37.8
℃
(100.0 ).
In Object mode:
WRITE
The display will be lighted WRITE for 3 seconds when the unit is
ready for measurement and the display will be lighted GREEN for
3 seconds when a measurement is completed.
℃
℉
℉
℉
Illustration For Use
Memory Mode
Figure
6
Figure
5
3.
The user can press the
Test Button
to take new measurements.
In the memory mode, mark or mark will not change.
1. The Memory Mode can be accessed ether in forehead mode or
object mode:
When the thermometer has been turned on and followed by
Figure 2/4 or finished testing, press the
Button
The
letter M will appear in the
corner of the display.
(See Figure )
Setting
.
lower left
5
2. The thermometer will automatically memorize the last 30
temperature readings.
Each time the
Button
is pressed, the screen displays past readings that correspond
with a number 1-30. The number 1 reflects the most recent
reading, while the number 30 reveals the oldest reading stored
in memory.(See Figure )
Each memory also records the
measurement mode icon.
Setting
6
