7
13
14
12
11
Temperature Taking Hints
5. Holding a hand on the forehead for any length of time will affect
the temperature reading.
6. Do not take temperature over scar tissue, open sores or abrasions.
7. Do not use the thermometer on a perspiring or sweating forehead,
as this may affect the reading.
8. Don't take a measurement while or immediately after nursing a
baby.
9. Do not take temperatures with this thermometer near places that
are very hot, such as fireplaces and stoves.
10. The probe window of the thermometer is the most delicate part
of the device. Do not touch the probe window. The accuracy of
the reading may be affected if the probe window is damaged or
dirty.
11. If the thermometer is stored in a significantly different
environment than testing location, place it in the testing location
for approximately 30 minutes prior to use.
12. It is not intended for use in the oxygen rich environment and
presence of flammable anesthetic mixture with air, oxygen or
nitrous oxide.
To ensure that the reading always reflects the body temperature
accurately, you need to take account of the following factors which
may affect an accurate reading.
1. It is important to know each individual's normal temperature
when they are well. This is the only way to accurately diagnose
a fever. To determine normal temperature, take multiple readings
when healthy. Re-measure with a standard digital thermometer
for confirmation.
2. Users must be inside for 30 minutes before taking a measurement.
Note: Users and the thermometer should be in the same ambient
temperature for at least 10 minutes before taking a reading.
3. Users should not drink, eat, or be physically active such as
bathing, showering, shampooing and hair drying before/while
taking the measurement. Remove hat and hair and wait 10 minutes
before taking a reading.
4. Oils or cosmetics on the forehead may give a lower temperature
reading than the actual one. Remove dirt from the forehead before
taking a measurement. Wait at least 10 minutes after washing the
forehead area before taking a reading.
Temperature Taking Hints
1. Press the
Test Button
, The display is activated to show all
segments.
Note: Do not remove the thermometer from the forehead before
hearing
.
3. Read the temperature on the display.
4.
After self-checking Figure 2 appears on the display
screen with voice, so you can start a new measurement.
2. Aim the thermometer at the center of the forehead with a distance
less than 5cm (See figure 3) and then press the
Test Button
.
voice
Device will automatically shut off if left idle for 30 seconds.
To measure forehead temperature:
Figure 3
Figure 2
Illustration For Use
Figure
4
To measure object temperature:
1.
the object temperature after
(see figure )
2. Aim the thermometer at the center of the object you want to
measure with a distance
e temperature on the
display.
4.
Press the
Test Button
to turn on the thermometer, you can take
going into measurement mode.
4
Device will automatically shut off if left idle for 30 seconds.
less than 5cm.
3. Press the
Test Button
and then read th
How to change the forehead mode and object mode:
You can press and hold
Setting Button
to switch the mode between
Forehead mode and Object mode.
How to turn on or off sound:
You can flip the
to turn on or off sound.
Voice Switch
Illustration For Use
