manualshive.com logo in svg

Joysway Hobby OFFSHORE LITE WARRIOR V4, Instruction Manual, Page: 6 / 6

Share
Download
Joysway Hobby OFFSHORE LITE WARRIOR V4 Instruction Manual Download Page 6

7.2V

82004A

Flex shaft for deep vee

82003

Aluminum Alloy Coupler w/3 screws

82006

Rudder Set

82007

Stainless Steel Turn fins set

82004B

Flex shaft for catamaran

820601

2.4GHz RX,ESC,Servo set

BIND

820803

OL Sea Rider V4 Deck(white)/Rubber Ring

Offshore Lite Warrior V4 /Sea Rider V5 RTR Mini EP Racing Boat

82001

OL Warrior Deck(Orange)/Rubber Ring

82020

2.4GHz Transmitter

82014

390 motor

FCC REQUIREMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must accept

any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifi cations to this product not expressly approved by the party responsible 

forcompliance may void the user’s authority to operate the equipment.

Check using the chart below before returning your Offshore Lite Series for repair as many problems can be 
easily solved.

AC Europe plug NiMH charger

7.2V 1100mAh NiMH battery

820801

82005

P1.4*D33/3 Propeller (Pk2) 

820602

Summary of Contents for OFFSHORE LITE WARRIOR V4







Reviews:

No comments