Joyner SZ250DI, Owner'S Manual

Page: 20 / 77

19
ADJUSTING NUT #3
ADJUSTING NUT
ADJUSTING NUT
C
．
Passengers
The vehicle allows for two riders only.
Combine maximum weight of driver
And the passenger should not exceed 180kg
or 400Ibs.
D
．
Seat Adjustment
The seat must always be securely
fastened in the position which best
affords the operator control of the foot
pedals, steering wheel, and the remote
stop button. Figure 4
a. Pull seat adjustment handle upward to disengage seat slide.
b. Move seat to desired position.
c. Be sure seat adjustment handle snaps back into place and that seat is locked
into position.
Before attempting to adjust the seat ensure that engine of the Go-Kart is stopped.
Never operate this Go-Kart when the provided seat is not securely fastened, to do so
could result in a strong possibility of severe personal injury or loss of life. Before attempting
to adjust the seat ensure that engine of Go-Kart is stopped.
E
．
Shift Adjustment
a. Press down the shift lever to the “L”
position so that the unit can move forward at
low speed, press the lever to “H” position so
that the unit can move forward at high
speed, Pull back the shift to “N” position so
that the unit can’t move because of in the
neutral, pull back the lever to “R” so that the
unit can move backward. (See Fig. 5)
b.
Loosen nut #1(RHD) and #2(LHD).
Adjust nut #3 can adjust the mesh status
inside reverse gear box. Make sure the shift
lever can be on the four positions (H, L, N,
R) cleanly. Then tighten the nuts #1, # 2.
Figure 5