you find are corrected. A pre-drive inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire, can be a major inconvenience.
If your UV650 has overturned or has been involved in a collision, do not drive it until
your UV650 has been inspected by your dealer, There may be damages or other
problems you can not see.
Improperly maintaining this UV650 or failing to correct a problem before driving can
cause a crash in which you can be seriously hurt or dilled.
Always perform a pre-drive inspection before every drive and correct any problems.
Pre-drive Inspection
Check the following items before you get on the UV650:
■
Engine Oil
Check the level and add oil if needed. Check for leaks.
■
Coolant
Check the coolant and add coolant if need. Check for the leaks.
■
Fuel
Check the level and add fuel if needed. Also make sure the fuel fill cap is securely
fastened. Check for leaks.
■
Tires
Use a gauge to check the air pressure. Adjust if needed. Also look for signs of
damages or excessive wear.
■
Nuts & Bolts
Check the wheels to see that the axle nuts are tightened, Use a wrench to make sure
all accessible nuts, bolts, and fasteners are tight.
Pre-drive Inspection
■
Underbody & Exhaust System
Check for, and remove any dirt, vegetation or other debris that could be fire hazard
or interfere with the proper operation of the UV650.
■
Air Cleaner
Check the air filter. Replace it if needed.
■
Leaks, Loose Parts
Walk around you UV650 and look for anything that appears unusual, such as a leak
or loose cable.
16