18
19
MAINTENANCE
1. Do not drop this monitor nor subject it to strong impacts.
2. Avoid high temperatures and direct sunlight. Do not immerse the monitor in water as this will
result in damage to the monitor.
3. If this monitor was stored at a temperature near the freezing point, allow it to come to room
temperature before use.
4. Do not attempt to disassemble this monitor.
5. If you do not use the monitor for a long time, please remove the batteries.
6. It is recommended the performance should be checked every 2 years or after repair. Please contact
the service centre.
7. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after moistened with water,
diluted disinfectant alcohol, or diluted soap suds.
8. No component in the monitor can be serviced by the user. The circuit diagrams, component part lists,
descriptions, calibration instructions, or other information which will assist the user’s appropriately
qualified technical personnel to repair those parts of equipment which are designated repairably can
be supplied.
9. The monitor can maintain the safety and performance characteristics for a minimum of 10,000
measurements or three years, and the cuff can maintain the performance characteristics for a minimum
of 1000 measurements.
10. It is recommended that the cuff should be disinfected 2 times every week if needed (for example,
in a hospital or in a clinic). Wipe the inner side (the side that contacts skin) of the cuff with a soft cloth
moistened with ethyl alcohol (75-90%) and squeezed, then dry the cuff by airing.
EXPLANATION OF SYMBOLS ON UNIT
Symbol for”THE OPERATION GUIDE MUST BE READ”. (The sign background colour: blue. The sign
graphical symbol: white)
Symbol for “WARNING”
Symbol for “TYPE BF APPLIED PARTS” (the cuff is a type BF applied part)
Symbol for “ENVIRONMENT PROTECTION” - Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist.
Check with your local Authority or retailer for recycling advice.
Symbol for “MANUFACTURER”
Symbol for “DATE OF MANUFACTURE”
Symbol for “EUROPEAN REPRESENTATION”
Symbol for “SERIAL NUMBER”
Symbol for “KEEP DRY”
0197
JC-1321 (KD-558) has been manufactured in compliance with the European
directives 93/42ECC 0197
Summary of Contents for JC-1321
Page 50: ...50 03 00 1 1 5 1 MEM 2 START 3 4 LCD 5 6 7 8 9 10 11 12 13 22 30 LCD 2x60 IEC 60601...
Page 52: ...52 300 mm Hg 15 mm Hg 3 7 1 2 AV 3 4 5 8 9 10 11 1 CV 25 2 0 14s 53 12 13 14 15 B 15 FCC...
Page 54: ...54 3 4 1 2 1 2 3 5 4 200 5 6 START 6 U1 U2 6 1...
Page 58: ...58 Er 3 Er 4 Er 5 300 mm Hg 5 Er 6 3 15 mm Hg Er 7 EEPROM Er 8 Er A 5 1 2 3 4 5 6 2 7 8 9 10...
