14
MANUFACTURER’S GUIDE AND DECLARATION - ELECTROMAGNETIC IMMUNITY
The clinical thermometer JC-138G (FDIR-V8) can be used in the following electromagnetic environment. The
customer or user of the clinical thermometer JC-138G (FDIR-V8) must make sure that the device is used in said
environment.
EMISSION TEST
COMPLIANCE
GUIDE TO THE ELECTROMAGNE-
TIC ENVIRONMENT
Electrostatic
discharges (ESD)
IEC/EN61000-4-2
± 6kV in contact
± 8kV in the air
The floors should be made of
wood, cement or baked clay.
If the floors are covered in
synthetic material, relative
humidity should not exceed 30%.
IEC/EN 61000-4-8
3 A/m
The magnetic field should be the
typical magnetic field
of a commercial or
hospital environment.
Irradiated immunity
IEC/EN61000-4-6
3 V/m 80 MHz at 2.5
GHz (in appliances that
are not life equipment)
DISPOSAL
The device (including its removable parts and accessories) must not be
disposed of together with municipal waste at the end of its life, but in
compliance with European Directive. Since it must be handled separately
from household waste, either carry it to a separatelycollected waste
disposal centre for electrical and electronic appliances or give it back
to the retailer on purchasing a new device with the same purpose. Any
infringement will be severely prosecuted.
The batteries used in this device must be disposed of in the special bins
at the end of their life.
All the indications, specifications and drawings are based on the latest
information available when this manual was printed. They can be subject to
variations or changes with no notice required.
