To Empty The Dust Collector:
• Turn the vacuum off and disconnect the unit from the power outlet and remove
any of the accessories attached to the unit.
• Gently pull down on the clip on side of the dust collector. This will allow the
“clean out” door to open and the contents to fall out.
• To close, simply push the access door closed until the latch snaps
shut.
To Clean the Filter:
• Turn the vacuum off and disconnect the unit from the power outlet and remove
any of the accessories attached to the unit.
• Separate the dust collector from the main body by turning the dust collector
clockwise to the “unlock” position as indicated on the dust collector unit.
Pull the main body apart from the dust collector.
• Before removing the filter, take out the Forever Fragrant
®
discs and retainer
ring.
• Remove the air filter by pulling out of the dust collector unit.
• Regularly remove the filter and shake the loose dust
from the filter surface and return to the dust collector and close.
• Regularly, remove the air filter and rinse well under cold, clean
water and leave to air dry completely.
• Do not wash the filter in a washer machine.
NOTE: The air filter is permantly installed in the filter holder.
The dust collector is transparent to enable you to see
accumulated dirt and debris.
DO NOT allow the
bin to fill past the max line. When this happens, the
efficiency of the motor unit is reduced and the dust
collector must be emptied and the filter assembly
cleaned. A blocked filter could restrict airflow to the
motor which can cause overheating. If this happens,
stop the unit and clean the filter.
