4. JT-DPS-USB & JT-DPS-BT (OPTIONAL PURCHASABLE)
To set up the lab power supply on your computer, you need a micro-USB
module that can be optionally purchased. This module can be installed in
the case either.
The BT module is built to control the lab supply via your smartphone. This
module can be installed in the case as well as the microUSB module.
First of all, those spacers must be
mounted at the module.
The module is going to be screwed next to the small
board from beneath the case.
The module then must be
plugged on to the mainboard.
The DPS5005 and the DPH5005 can
both use the two modules either.
But the place of the port which is
used for the modules, depends on
the model.
You should note that the case could
affect the range of the BT module.
The necessary software can be downloaded from our website:
