3. ASSEMBLY OF THE CASE
Prepare the needed components.
2. COMPONENTS
To facilitate the assembling, you should
begin with the small board from the case.
You have to solder a fan on the board,
also a toggle switch and a cable have to
be pursued to the mainboard.
The mainboard does not have a port for
the fan. That is the reason that it has to be
soldered on to the small board.
Therefore, the cable of the included fan has to
be cut.
You must be very careful when you relieve the
insulation from the cable core. The cores have
to be free of insulation about 4 mm.
