Date:
Manual:
Rev:
2020-02-04
M395
F2
JOWA Ag-S
Silver Ion Water Treatment System
Standard
18/32
5.
During the Flush operation no Silver Ions will be produced. The system
will time out and return to the former state after 5 minutes or when
exiting this menu.
5.4.6
Setup Relays (Optional – when using outputs)
1.
Under the
Setup
section of the main menu you choose the relay that
will be used for the output.
2.
Select
Relays
and press Enter
3.
Select the relay you want to setup;
Rel1
,
Rel2
,
Rel3
and press Enter
4.
Select the desired function for the relay;
Unused
,
Pump
,
Alarm
,
Power
and press Enter
Pump –
Activates the relay when the Ag-S is treating water with
Silver. Used most commonly to turn on a pump if the Ag-S
is not connected to a pressurized tank. Typically Relay 1.
Alarm –
Activates the relay during an alarm condition. The relay
remains active until the alarm is acknowledged. See the
next step for additional settings. Typically Relay 2 steady.
Power –
Activates the relay when power is connected to the Ag-S.
Typically Relay 3.
5.
If Pump or Power are selected then the menu will return to the previous
screen. If Alarm is selected then you need to select
Solid
or
Flashing
.
If Flashing is selected then the number of times per second the relay
will be closed will also need to be selected. Acknowledging the alarm
deactivates the relay.
5.4.7
Select Direct Flow Mode
1.
Under the
Setup
section of the main menu select
Tank/Dir
and press
Enter
2.
Select
Direct flow
and press Enter
3.
Confirm
the selection by pressing Enter
5.4.8
Setup Input for Direct Flow
1.
Under the
Setup
section of the main menu you choose the input that
will be used for the flow signal.
2.
Select
Inputs
and press Enter
3.
Choose the input you want to setup and press enter. Typically this will
be In 1.
4.
Select
Direct Flow
(Tankless flow) and press Enter
5.
If a value was previously entered then set a
Show
and
Set
option will
be available to just show the current value. Choose
Set
to enter a new
value.
6.
Select the units you want to enter for the flow and press Enter
Summary of Contents for Ag-S
Page 1: ...Ag S Manual Silver Ion Water Treatment System M395 February 4 2020 ...
Page 2: ......
Page 36: ......
