Jovyatlas Powermaster ? 1000, Operating Manual

Page: 13 / 15

JOVYATLAS UPS-division
Operating manual
POWERMASTER M
MIL BAX 3330E page 13
Attention!
These alarm messages can’t be reset without a complete switch-off of the
UPS-system. Please contact our service department in case of alarms like
these.
8. Alarm messages for 115V - Series
8.1 Displayed alarm messages for 115V - Series
The display of the UPS is designed to send out 7 messages.
E01 : Inverter failure
The alarm Message E01 will be shown at the display and the
connected load is supplied through the internal bypass further on.
E02 : Overtemperature
The alarm E02 will be shown at the display and the connected
load is supplied through the internal bypass further on.
E03 : Short circuit on the part of the output
In case of this fault the UPS-system switches off immediately .
„The existing load won’t be supplied any longer“.
The alarm message E03 will be shown at the display
E04 : Overloading of the UPS-system
The alarm E04 will be shown at the display and the connected
load is supplied through the internal bypass further on.
E05 : Misvoltage (>400VDC) on the part of the d.c.voltage
The alarm E05 will be shown at the display and the connected
load is supplied through the internal bypass further on.
E06 : Misvoltage of the battery
(voltage higher than 280V
DC
)
The alarm E06 will be shown at the display and the connected
load is supplied through the internal bypass further on.
E07 : Battery voltage is too high or too low
The alarm E07 will be shown at the display and the connected
load is supplied through the internal bypass further on
Vac
Hz
°C
%
R S T I/P O/P
LOAD
+
BATT
LINE
BY PASS
INV
BACKUP
FAULT
INV
!
0 % 20 % 40 % 60 % 80 % 100 %
0 % 20 % 40 % 60 % 80 % 100 %
E01
Vac
Hz
°C
%
R S T I/P O/P
LOAD
+
BATT
LINE
BY PASS
INV
BACKUP
FAULT
INV
!
0 % 20 % 40 % 60 % 80 % 100 %
0 % 20 % 40 % 60 % 80 % 100 %
E02
Vac
Hz
°C
%
R S T I/P O/P
LOAD
+
BATT
LINE
BY PASS
INV
BACKUP
FAULT
INV
!
0 % 20 % 40 % 60 % 80 % 100 %
0 % 20 % 40 % 60 % 80 % 100 %
E03
Vac
Hz
°C
%
R S T I/P O/P
LOAD
+
BATT
LINE
BY PASS
INV
BACKUP
FAULT
INV
!
0 % 20 % 40 % 60 % 80 % 100 %
0 % 20 % 40 % 60 % 80 % 100 %
E04
Vac
Hz
°C
%
R S T I/P O/P
LOAD
+
BATT
LINE
BY PASS
INV
BACKUP
FAULT
INV
!
0 % 20 % 40 % 60 % 80 % 100 %
0 % 20 % 40 % 60 % 80 % 100 %
E05
Vac
Hz
°C
%
R S T I/P O/P
LOAD
+
BATT
LINE
BY PASS
INV
BACKUP
FAULT
INV
!
0 % 20 % 40 % 60 % 80 % 100 %
0 % 20 % 40 % 60 % 80 % 100 %
E07
Vac
Hz
°C
%
R S T I/P O/P
LOAD
+
BATT
LINE
BY PASS
INV
BACKUP
FAULT
INV
!
0 % 20 % 40 % 60 % 80 % 100 %
0 % 20 % 40 % 60 % 80 % 100 %
E06