2
Table of contents
1.0 Introduction ................................................. 2
2.0 Technical information ................................. 2
3.0 General information ................................... 2
4.0 Installation .................................................. 3
5.0 Conservation ................................................ 3
6.0 Warranty ...................................................... 3
Figures ....................................................................4
1.0 Introduction
Manual for fitting a decorative frame is a supplement for fitting
and use of Jøtul I
600
FL insert. Fitting of insert must be made
according to the „Manual for fitting and use of Jøtul I
600
FL”.
To become fully conversant with its contents will help correct
fitting, which is necessary to ensure proper and safe use.
Fitting of the insert should be performed in accordance with
the provisions of force in the relevant country.
2.0 Technical information
Material
steel, stainless steel
Finish
steel - powder paint
stainless steel - INOX
Weight
10.5 kg low frame
14.0 kg high frame
Size
see Figure 1
Index
Description
TS80C002
Front frame BP for I 600 high
TS80C010
Front frame BP for I 600 low (approx.16/9)
TS80D002
Front frame SS for I 600 INOX high
TS80D010
Front frame SS for I 600 INOX low (approx.16/9)
Package contents:
Frame
1 piece
Fitting plate
2 pieces
Angle bar fitting
2 pieces
Air valve handle
1 piece (black frame only)
Hexagon socket head cap
screw M8
4 pieces
Views and size of Figure 1
3.0 General information
Decorative frame is to be fitted on the Jøtul I
600
FL insert.
Depending on the version performed it is made of sheet steel,
powder-painted the black colour or made of stainless steel
INOX.
Putting into use the decorative frame simplifies fitting of
surrounding and masks finishing inaccuracies between insert
and surrounding.
ENGLISH
