20
139684_Rev_7 / C 450 Kennebec 7 / 17
Minimum Clearances
Clearances are measured from the hearth surface,
door opening, or centerline as noted below.
A: Hearth Protection, width from centerline ...........
.............................................................. 20” (508 mm)
B: Hearth Protection, forward from the door opening
................................................................18” (457 mm)
C: Side Trim,
1” max. thickness, from centerline
.......
...............................................................
20 3/4” (527 mm)
D: Side Room Wall .........................44 1/4” (1124 mm)
E: Mantel- with no Heat Shield:
3 1/2” (90 mm) ............................ 49 1/2” (1257 mm)
F: Mantel- with no Heat Shield:
12” (304 mm) max. depth - 55 1/2” (1410 mm)
Figure 22. Clearance Diagram - No Heat Shielding
Figure 23. Mantel Clearances - measured from the
hearth surface to the lowest mantel surface.
Mantel Clearance with
Optional Heat Shield
155346
Clearance may be reduced as shown in fig. 8b.
Maximum approved Mantel Depth is 12”.
Clearance is measured from the hearth to the bottom
of the mantel as illustrated.
Figure 24. Mantel Clearances, with Mantel Heat Shield
155346 - measured from the hearth to the mantel.
Appendix B
These clearances apply only to Jøtul
C 450 fireplace inserts built before
December 30, 2014 and having serial
numbers lower than 14251.
Hearth protection requirements are the same
as specified on page 8 of this manual.
