jotron Tron VHF, Operator'S Manual

Page: 2 / 32

W
ARNING / IMPOR
T
ANT
Jotron Electronics a.s. is a prime manufacturer of safety equipment designed for
rescue of human lives and their property. For safety equipment to be effective in
line with the design parameters it is important that they are handled, stowed
and maintained in compliance with the manufacturers instructions. Jotron
Electronics a.s. can not be held responsible for any damage caused due to incorrect
use of the equipment or breach of laid down procedures or for failure of any speci-
fic component or other parts of the equipment.
The chapter covering battery replacement (5.1) is added for information only.
Jotron Electronics a.s. does not take any responsibility for improper disassemb-
ling/assemblin of the beacon. We strongly recommend all service to be done by
authorized Jotron agents. In addition to normal service, Jotron agents have the
necessary equipment and education to test the operational functions of the beacon.
Non-original maintenance and/or service parts may destroy the equipment
function and performance.
The information in this book has been carefully checked and is believed to
be accurate. However, no responsibility is assumed for inaccuracies.
CAUTION!
This equipment contains CMOS integrated circuits. Observe handling
precautions to avoid static discharges which may damage these devices.
JOTRON electronics a.s reserves the right to make changes without
further notice to any products or modules described herein to improve
reliability, function or design. JOTRON electronic a.s does not assume any
liability arising out of the application or use of the described product.
The equipment complies with the Harmonized Standards applied in order to
following Directives: verify compliance with the Directive(s):
MED 96/98/EC ETS 300 225:1998
EMC 89/336/EEC EN 300 828:1998
EN 60945
EN 50022 class B
EC Declaration of Confirmity, available at www.jotron.com