jotron Tron 40GPS MkII, User Manual

Page: 30 / 44

82819_UM_40SMkII_H
www.jotron.com www.jotron.com
new expiration date, approximately 5 years from purchase.
6. Fit a new gasket on top of the battery module and reconnect the 6-pin
connector, be sure that the connector is fitted properly. A noticeable
«click» should be heard when the connector is in place.
7. Please make sure that the enclosed silica-gel bag is fastened inside the
emergency product, with the supplied strips into/between holes in the black
cover.
IMPORTANT: Cut the strips p/n 96898 after mounting of silica gel to avoid the
strips to come between rubber gasket and top housing.
8. Please also fit the enclosed anti corrosion adhesive tape to the inside of
the battery before assembling the unit.
9. Orientate the two halves of the EPIRB the following way:
An orientation tab is fitted on both halves of the EPIRB, these tabs must be
placed carefully on top of each other.
10. Make sure that the gasket is properly in place, and replace the equator ring
using a special tool to tighten it together.
11. Replace the U-shaped bolt and a new split pin to secure the bolt in the
equator ring.
12. Remount EPIRB in its bracket.
6.1.3 BATTERY DISPOSAL
Dispose in accordance with applicable regulations, which vary from coun-
try to country.(In most countries, the thrashing of used batteries is forbidden
and the end-users are invited to dispose of them properly, eventually through
non-profit organizations, mandated by local governments or organized on a
voluntary basis by professionals).Lithium batteries should have their terminals
insulated prior to disposal.
6.1.4 INCINERATION
Incineration should never be performed by battery users but eventually by trai-
ned professionals in authorized facilities with proper gas and fumes treatment.
30