10
06.14
Josef Kihlberg B560PN
7
PREVENTIVE AND CORRECTIVE MAINTENANCE
7.1 LUBRICATION
The linkage bearings are greased at delivery.
At regular intervals (monthly) lubricate them with oil.
Also lubricate the moving parts in the stapling head
with a few drops of oil.
7.2 CLEANING THE BOTTOM STAPLER
This bottom stapler does not require special servicing.
It only needs regular cleaning with a non-aggressive
(non-corrosive) cleaning agent. Do not remove any
parts for cleaning purposes!
Check the proper functioning of all safety
devices daily. Make especially sure that:
– the foot valve safety latch and the protector move
freely without binding or sticking.
– all screws and nuts are securely tightened.
Before carrying out any maintenance
tasks on the bottom stapler always
first disconnect it from the air supply.
– Pull the pusher back to take the pressure off the
staple strip.
–
Slightly loosen the five screws (Fig. 11/1 and 11/2)
that hold the front plate one turn.
– Remove the jammed staple downwards.
–
Retighten the five screws.
7.3 REMOVING JAMMED STAPLES
Before carrying out any maintenance
tasks on the bottom stapler always
first disconnect it from the air supply.
Fig. 11
2
1
1
1
1
