8
CLEANING INSTRUCTIONS
7. Clean all the valve parts, body and shaft.
8. Reassemble the inner parts and shaft.
Screw the shaft assembly back on to the
valve body (max. torque 7Nm) using a 13
mm wrench.
10. Swith on the electrical supply.
9. Reposition the coil, timer and connector
assembly on to the valve, replace the top nut
and tighten the top nut (max. torque 1Nm)
using a 14 mm wrench.
11. Open the ball valve in front of the filter to
restore normal system pressure.
12. Press the test button to check the valve
function.
13.Your TEC-11 is now ready for operation!