STOP
GO
SOUND OFF
2 x
C/AM2/R14
STOP
GO
SOUND OFF
MODIFY
LOCK
HOUR GLASS
BLITZ
BONUS TIMER BRONSTEIN
GAME
PRIMARY
SECONDARY
TERTIARY
TOURNAMENT
HOUR GLASS
BLITZ
BONUS TIMER BRONSTEIN
GAME
HOUR GLASS
BLITZ
BONUS TIMER BRONSTEIN
GAME
PRIMARY
SECONDARY
TERTIARY
TOURNAMENT
BLITZ
BLITZ
PAUSE
HOUR GLASS
BLITZ
BONUS TIMER BRONSTEIN
GAME
PRIMARY
SECONDARY
TERTIARY
TOURNAMENT
HOUR GLASS
USER
BLITZ BONUS TIMER BRONSTEIN
GAME TOURNAMENT
NEXT/MOVE NO.
PAUSE
ADJUST
SET
GAME CLOCK II
ACL
D I G I T A L G A M E T I M E R
1
First, make sure that the
STOP/GO/SOUND OFF
switch on the bottom of the
unit is set to STOP. Insert 2
“C” (AM2/R14) batteries into
the battery compartment.
The
correct polarity (+/–) is shown
inside the compartment.
QUICK START
To try out the clock right away, without reading the entire manual first, simply follow these Quick Start steps!
2
Set the STOP/GO/SOUND
switch to GO.
5
Ready? Let’s try a 5-minute
Blitz game where you move
first! To start timing, press
your opponent’s Timing
Activator Button. Your clock
will start counting down, and
your LED will light. Try to
make the best move in the
least amount of time!
6
As soon as you’ve completed
your move, press your own
Timing Activator Button! Your
clock will stop, and your
opponent’s clock will now
start counting down.
4
The Blitz Timing Option is
automatically selected at the
initial start-up. Notice the
arrow (
%
) on the left-hand
display, pointing to the word
Blitz. Both displays show
05.00
, indicating that each
side has 5 minutes for this
game.
7
Both players continue to
make moves, one by one—
with each of you pressing
your Timing Activator Button
after every move. If the time
runs out for one side and this
display appears, that player
has lost the game!
To pause at any time, press PAUSE. To resume, press one of the
Timing Activator Buttons. To reset for another 5-minute Blitz game,
press and hold PAUSE for at least 3 seconds. To select a different
Timing Mode and find out about all your other choices, go on to
explore the rest of the manual!
Next, set the MODIFY/LOCK
switch (located above the GO
switch) to MODIFY.
3
(Note: If you don’t see the above
displays, press BLITZ. If the displays still
don’t match, you’ll need to reset the unit!
Press PAUSE for at least 3 seconds, and
then press BLITZ.)
