EN
FR ES
!
WARNING
This product is a TOY stroller for dolls or stuffed toys ONLY.
NEVER use this toy to carry a baby or child for any purpose whatsoever. Death or Serious Injury may occur.
Maximum weight allowed = 5 lbs. (2.28 kg) in EACH seat.
12 Storage Basket
• The maximum weight that can be carried in the storage basket is 5 lbs. (2.28 kg).
NOTE:
There are Velcro® attachments on the underside of the basket to stow the car seat carrier support when it is not in use. To stow
the car seat carrier support, simply secure it to the basket as shown in
Figure 12.1.
13 Using the stroller as a Doll Car Seat Carrier
• To use the stroller to carry a doll car seat carrier, you must replace the Front Tray with the Car Seat Carrier Support.
• Remove the Front Tray by pressing in on the buttons under the female fitting and pulling the tray off the brackets.
• Line up the Car Seat Carrier Support to the metal tubing on the front of the stroller and push inward until the support snaps into place.
See
Figure 13.1.
Pull outward on the support sides to be sure both are snapped securely in place.
• Adjust the backrest to its reclined position.
• If necessary, remove the infant carrier from the car seat base.
• Place the infant carrier onto the top of the stroller in a REAR FACING POSITION, locating the head end of the carrier so that it rests on
the car seat support and the feet end of the carrier so that it rests against the seatback.
See Figure 13.2.
• Insure that the infant carrier is pushed down into this position firmly and that it is centered side to side.
• Remove the carrier restraining strap from the pouches on the sides of the front seat. Buckle it in place over the LOWEST part of the
carrier sides. Adjust the strap so that it is tight around the carrier. Pull up on the carrier to be sure it is held on securely.
See Figure 13.3.
!
WARNING
ALWAYS install the doll carrier in a REAR FACING POSITION.
ALWAYS secure the carrier with the restraint strap.
14 Folding the Stroller
• Orient the stroller with the handle bar closest to you.
• Place the canopy into its closed position and push it as far forward toward the front of the stroller as it will go.
• Pull upwards on the trigger mechanisms on both sides of the stroller.
See Figure 14.1.
• While these mechanisms are in the upward position, push forward and down on the stroller using the handle bar.
• Secure the stroller in the folded position by engaging the locking latch located on the right side of the stroller over the extended rivet on
the right side of the stroller.
See Figure 14.2.
Maintenance
All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the stroller should be inspected periodically to insure that they
are secured properly and not damaged or malfunctioning. The seat belts and safety harnesses, as well as all other straps and fabric items
and their stitching should also be inspected periodically to insure that they are secured properly and not loose, torn or otherwise damaged.
All moving parts, such as wheels, brakes, and hinges should also be checked periodically to insure they are operating properly.
Any missing, broken, or worn components should be replaced immediately, and the stroller should not be used until they are replaced. Only
original manufacturer’s components should be used. If needed, please contact Joovy (USA) or ISSI Inc. (Canada) at our toll-free phone
number.
Fabric fading may occur if the stroller is left in direct sunlight for long periods of time. When not in use, store the stroller out of direct sun.
Cleaning
The fabric material on this stroller can be cleaned using a cloth dampened with warm water. Always allow the fabric to completely air dry
before using the stroller.
The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the stroller in rain, snow, or
other harsh environments. Use a cloth dampened with warm water and a mild detergent cleaner to clean the wheels after such use.
SATISFACTION GUARANTEED
We want you to be completely satisfied with your purchase of this product. Should you experience any difficulty in
assembling or using this product, or if you have any questions, please contact our Customer Service Department:
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
CANADA – ISSI Inc.: (800) 667-4111, Hours 8:30 am – 5:00 pm Eastern Time.
Please log onto www.joovy.com to register your new Joovy product.
