Joovy 00326, Instruction Manual

Page: 7 / 43

7
Rear Wheel Brakes
• To lock the parking brakes, push down on one of the rear wheel covers and rotate it until it locks. (8)
• Repeat this step for the parking brake on the other rear wheel.
IMPORTANT:
Gently push the walker back and forth to ensure the brake is fully engaged.
• To unlock the parking brakes, push up on each rear wheel cover to rotate it to the unlocked
position. (9)
Using the Tray Insert
• To attach the tray insert, fit the tray insert into the tray until both sides click into place.
• The tray insert is removable and dishwasher safe.
• To remove the tray insert, flex the handles inward, push down with your thumbs on the inner edge of
the tray and pull up. (10)
Folding the Walker
• To fold the walker for storage or transport, steps above for Adjusting the Height of the Walker and
fully collapse the walker into its flat position.
Removing the Seat for Washing
• Starting with the front of the seat, lift up on one of the posts and pull it out. (11)
• Repeat for the other 2 posts.
• From under the tray, starting with a plastic clip on one end, turn this clip so that it can be pushed
through the slot. Push it all the way through the slot.
• Repeat for the other 4 clips. The seat should now be detached from the tray.
• Open the zipper completely.
• Push all of the plastic clips through the slots in the fabric and then remove the pad with the plastic
clips attached. (12)
• The seat COVER can be washed following the instructions on the tag attached to it. DO NOT
wash the pad with the clips.
• Dry the seat cover completely before reassembling the pad and clips and reinstalling the seat onto
the walker.
Reassembling the Seat
• Replace the pad with the clips into the seat cover so that the curve of the pad matches the curve
of the seat cover. The plastic clips should be on the same side of the seat cover as the zipper and
the slots for the clips.
• Feed each plastic clip through its corresponding slot in the seat cover. (13)
• Close the zipper. (14)
• To reinstall the seat onto the walker, follow the instructions above for Installing the Seat.