4x4 Instruction Manual
Page 3
Installing the Steering Wheel
NOTE: Installation is easier with a second person to hold
the steering bar.
• Lift the front of the vehicle up and slide the straight
end of the steering bar through the U shaped hole on
the steel axle and also through the hole in the vehicle
body. Also insert the curved end of the steering bar
into the oval slot in the plastic front axle. Slide the bar
all the way until the collar on the steering bar hits the
U shape hole on the steel axle. See Figure 2.
• Sit the vehicle on all four wheels while holding the
steering bar in place.
NOTE: It is easier to have a second person hold the
steering bar in place while you attach the steering
wheel.
• Place the steering column, with the open end up, over
the steering bar while threading the horn wire through
the steering column. See figure 3.
• Connect the horn wire of the steering wheel to the
vehicle horn wire until you hear a snap. Pull the wire to
ensure that it is fully connected.
• Place the steering wheel over the steering bar so that
the hole on the steering wheel lines up with the hole in
the steering bar.
• Insert the round head screw through the round hole,
(NOT the square hole) in the steering wheel so that it
comes out the other side. Place the nut in the square
hole and tighten the screw in place using a Phillips
head screwdriver. See Figure 4.
• Pull and turn the steering wheel to ensure it is secure.
Figure 2
Figure 3
Figure 4
Summary of Contents for 0008X Series
Page 15: ...4x4 Instruction Manual Page 14...
