Jonsered CS 2117 EL, Operator'S Manual

Page: 5 / 20

ENGLISH
3
e)
When operating a power tool outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f)
If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply.
Use of
an RCD reduces the risk of electric shock.
3)
Personal safety
a)
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power tool
while you are tired or under the infl uence of drugs, alcohol or
medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b)
Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard had, or hearing protection used for appropriate
conditions will reduce
personal injuries.
c)
Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with
your fi nger on the switch or energising power tools that have the
switch on invites accidents.
d)
Remove any adjusting key or wrench before turning the
power tool on.
A wrench or a key left attached to a rotating part
of the power tools may result in personal injury.
e)
Do not overreach. Keep proper footing and balance at all
times.
This enables better control of the power tool in unexpected
situations.
f)
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in movingparts.
g)
If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used.
Use of dust collection can reduce dust-related
hazards.
4)
Power tool use and care
a)
Do not force the power tool. Use the correct power tool for
your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it on
and off
. Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or
the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d)
Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by
poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g)
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed.
Use of the
power tool for operations different from those intended could
result in a hazardous situation.
5.
Service
a)
Have your power tool serviced by a qualifi ed repair person
using only identical replacement parts.
This will ensure that the
safety of the power tool is maintained.
Chain saw safety warnings:
• Keep all parts of the body away from the saw chain when
the chain saw is operating. Before you start the chain saw,
make sure the saw chain is not contacting anything.
A moment
of inattention while operating chain saws may cause entanglement
of your clothing or body with the saw chain.
• Always hold the chain saw with your right hand on the rear
handle and your left hand on the front handle.
Holding the
chain saw with a reversed hand con fi guration increases the risk of
personal injury and should never be done.
• Hold the power tool by insulated gripping surfaces only,
because the saw chain may contact hidden wiring or its own
cord.
Saw chains contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an
electric shock.
• Wear safety glasses and hearing protection. Further
protective equipment for head, hands, legs and feet is
recommended.
Adequate protective clothing will reduce personal
injury by fl ying debris or accidental contact with the saw chain.
• Do not operate a chain saw in a tree.
Operation of chain saw
while up a tree may result in personal injury.
• Always keep proper footing and operate the chain saw only
when standing on fi xed, secure and level surface.
Slippery or
unstable surfaces such as ladders may cause a loss of balance or
control of the chain saw.
• When cutting a limb that is under tension be alert for spring
back.
When the tension in the wood fi bres is released the spring
loaded limb may strike the operator and/or throw the chain saw
out of control.
• Use extreme caution when cutting brush and saplings.
The
slender material may catch the saw chain and be whipped forward
toward you or pull you off balance.
• Carry the chain saw by the front handle with the chain saw
switched off and away from your body. When transporting or
storing the chain saw always fi t the guide bar cover
.
Proper
handling of the chain saw will reduce the likelihood of accidental
contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and
changing accessories.
Improperly tensioned or lubricated chain
may either break or increase the chance for kickback.
• Keep handles dry, clean and free from oil and grease.
Greasy,
oily handles are slippery causing loss of control.
• Cut wood only. Do not use chain saw for purposes not
intended. For example: do not use chain saw for cutting
plastic, masonry or nonwood building materials.
Use of the
chain saw for operations different than intended could result in a
hazardous situation.
Causes and operator prevention of kickback:
Kickback may occur when the nose or tip of the guide bar touches
an object, or when the wood closes in and pinches the saw chain
in the cut. Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the operator.
Pinching the saw chain along the top of the guide bar may push
the guide bar rapidly back towards the operator. Either of these
reactions may cause you to lose control of the saw which could
result in serious personal injury. Do not rely exclusively upon the
safety devises built into your saw. As a chain saw user, you should
take several steps to keep your cutting jobs free from accident
or injury. Kickback is a result of tool misuse and/or incorrect
operating procedures or conditions and can be avoided by taking
proper precautions as given below:
• Maintain a fi rm grip, with thumbs and fi ngers encircling the
chain saw handles, with both hands on the saw and position
your body and arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator, if proper
precautions are taken. Do not let go of the chain saw.
• Do not overreach and do not cut above shoulder height.
This
helps prevent unintended tip contact and enables better control of
the chain saw in unexpected situations.
• Only use replacement bars and chains specifi ed by the
manufacturer.
Incorrect replacement bars and chains may cause
chain breakage and/or kickback.
• Follow the manufacturer’s sharpening and maintenance
instructions for the saw chain.
Decreasing the depth gauge
height can lead to increased kickback.
IMPORTANT! READ BEFORE USING CHAIN SAW