Jonsered CS 2117 EL, Operator'S Manual

Page: 4 / 20

ENGLISH
2
SYMBOLS USED IN OPERATOR’S MANUAL:
Do not use a coiled extension cord.
Minimum wire cross-section: 1,5 mm²
Maximum cable length: 30 m
Voltage: 230 V
CAUTION!
Chain saws are dangerous!
Careless or improper use can
result in severe or fatal injury.
Noise emission to the environment according to the
European Community’s Directive. The machine’s
emission is specifi ed in «TECHNICAL SPECIFICA-
TIONS» page 4 and on label.
Always disconnect power before performing
cleaning or maintenance work.
Visual inspection.
Always use approved safety gloves.
Clean your chain saw regularly.
Use approved face mask or safety goggles.
CAUTION!
Chain saws are dangerous! Careless or im-
proper use can result in serious or fatal injury.
IMPORTANT! READ BEFORE USING CHAIN SAW
Read operating instructions and make certain you
understand them thoroughly before using the chain
saw.
Always use:
• Approved helmet
• Approved hearing protection
• Approved safety goggles or face mask
The chain saw is double-insulated.
This product conforms to
applicable CE directives.
Do not expose saw to rain or moisture.
Disconnect power in case of damage to power cable.
Maximum permissible guide bar length.
SYMBOLS ON THE CHAIN SAW:
This product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local council offi ce, your household waste disposal service
or the shop where you purchased the product.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and
instructions for future reference.
The term“power tool” in the
warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark areas
invite accidents.
b)
Do not operate power tools in explosive atmospheres, such
as in the presence of fl ammable liquids, gases or dust.
Power
tools create sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
2)
Electrical safety
a)
Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adaptor plugs with earthed
(grounded) power tools.
Unmodi fi ed plugs and matching outlets
will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an
increased risk of electric shock if your body is earthed or grounded.
c)
Do not expose power tools to rain or wet conditions.
Water
entering a power tool will increase the risk electric shock.
d)
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.