Jonix steel 1C, Use And Maintenance Manual

Page: 34 / 96

34
JO NIX
steel
34
33
Fig. 34: Screw delicately the ionising tube
holding on to the base (green part).
If the operation is difficult to perform, pull
slightly the earthing bracket so that it does
not make contact with the surface of the
tube.
aTTenTIon: do not overtighten the screw
after reaching its end stop.
check that the earthing spring
is in contact with the outer
mesh once the ionising tubes
have been screwed back into
place. otherwise contact the
manufacturer.
If the operation is difficult
to perform, pull slightly the
earthing bracket so that it does
not make contact with the
surface of the tube
.
Fig. 33: Gently unscrew the ionising tubes,
using the green plastic base.