15
锁芯固定螺丝
FA4*25
天地拉杆根据需
要上下调动
机械锁头
锁头固定螺丝
FM5*65
天地拉杆根据需要上下调动
3.3.2 Installing the front and back lock body
Before installing the lock body, please check if the handle springs fall off, and
put the handle square shafts into the lock cylinder. Please notice the directions
of opening left and opening right: the downwards arrow is for opening right and
upwards for left. As showing below, the 4P line of the front body connect the
cylinder, the 3P line connect the back body and the square shaft of deadbolt
should be put in the pore of cylinder. Then fix the body with 4 pieces FM 5 * 65
Machine Screws. And next load the batteries and fix the back cover 1 and back
cover 2.
