11
” to enter the programming mode. Next, press 5 +
and put in the
2-digit password number you want to delete and end up with pressing
.
Repeat the 2-digit LOCK and the password is deleted
8.
Setting keep-open state: Opening the lock by fingerprint or password,
press the handle to keep opening the door for 6 seconds until you hear the
voice prompt of “the door is in the keep-open state”. The setting is finished.
Opening the door by fingerprint or password can cancel the keep-open
state.
9.
Adding a card:
Press “* +
+ administrator pa
” to enter the
programming mode. Next, press 9 +
and hold the card to the card
reader. (Adding cards continuously is available)
10.
Press “* +
+ administrator password +
” to enter the programming
mode. Next, press 3 +
, and put in the number of the card +
.
11.
Volume adjustment:
Press “* +
+ administrator password +
” to
enter the programming mode. Then press 2+
to adjust the volume. 1 is
to decrease to volume while 3 to increase.
12.
Chinese & English shifting:
Press “* +
+ administrator password +
” to enter the programming mode. Next, pressing 0 +
can shift
language between Chinese and English.
2.5 Alarming Function
2.5.1 Low voltage alarm
If the battery is in low power, whenever you open the door by fingerprint,
password or card, the lock will alarm with the voice prompt of “power low,
please replace
batteries”.
2.5.2 Preventing dismantling alarm
If it is dismantled or opened the outer shell by force, the lock will alarm with
the sound of “DiDi…”.
If the preventing dismantling alarm switch can not be shut completely
when installed or other reasons, it will be alarming.
