(2) Prospector 100 PSI Carpet Extractor
Warranty Policy Continued
No labor will be paid for, nor parts cost paid for or reimbursed, that have not previously been approved by the
manufacturer. All warranty work must be approved and authorized to qualify, and appropriate warranty procedures must
be followed.
The warranty starts on the purchase date by the original purchaser from an authorized Jon-Don, Inc. distributor, subject to
proof of purchase. The Machine Registration Form must be completed and sent to the original manufacturer at the time of
purchase. If proof of purchase cannot be identified, the warranty start date is ninety (90) days after the date of sale to an
authorized Jon-Don, Inc. distributor.
1.0 Safety Instructions
READ THIS MANUAL BEFORE USING YOUR Prospector Carpet Extractor. KNOW THE PROPER
OPERATION, CORRECT APPLICATIONS AND THE LIMITATIONS OF THIS EQUIPMENT
BEFORE
USE.
Reduce the Risk of Fire, Electric Shock or Injury:
Use only as described in this manual. Use only the attachments recommended by the manufacturer. Test all outlets
with an outlet tester before plugging machine into any outlet. Plug cord into the nearest grounded outlet. Never attempt
adjustments or repairs while the machine is plugged in. Pay close attention when using machine near children.
Lift using only the appropriate handles. Always wear the appropriate clothing and safety equipment when operating
the machine. Keep all body parts, hair and loose clothing away from openings and moving parts. Use extra care when
cleaning stairs. Never move the machine up or down stairs with fluid in the machine. Use common sense to protect
yourself and others from injury when using the machine.
• DO NOT unplug by pulling on the cord, grasp the plug. DO NOT pull unit by the cord.
• DO NOT use if cord or plug are damaged. Keep cord away from heated surfaces.
• DO NOT use outdoors, in standing water on wet surfaces.
• DO NOT pick up flammable or combustible materials or use machine where they may be present.
• DO NOT leave machine outdoors, in extreme heat or cold. Harsh weather elements will damage components and void
warranty.
• DO NOT use powdered detergents in machine - will VOID warranty.
2.0 Grounding Instructions
DANGER: IMPROPER GROUNDING METHOD CAN RESULT IN A RISK OF ELECTRIC SHOCK.
Electrical equipment must be grounded. If the machine should malfunction or breakdown, grounding provides a path of
least resistance for electrical current to reduce the risk of electric shock. The Prospector Carpet Extractor is equipped with
a cord containing a grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded wire to a flat bed terminal. The
grounding wire is the wire with insulation and an outer green surface, with or without yellow stripes.
Grounding Method
The electric Prospector Carpet Extractor is for use on a normal 120 volt circuit. It has a grounded plug that fits the outlet
illustrated in Figure A. If a properly grounded outlet is not available, a temporary adapter, such as the adapter illustrated
in Figure B and C, may be used to connect the plug into a 2-pole outlet, as shown in Figure C.
The temporary adapter should be used only until a properly grounded outlet, Figure A, can be installed by a qualified
electrician. The green colored rigid ear lug or grounding means extending from the adapter must be connected to a
permanent ground, such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place
by its grounding means and a metal screw, as shown in Figure C.
SEE DIAGRAM ON NEXT PAGE