XBASE 999 Operating Manual
37
Source
<Sourc>
<NOR/FIL/NOI>
The source parameter decides which signal is to be routed to the HH
filter and VCA.
Hello999 OOOHiHa PerfOO1
RevrsOFFSourcNOR Ed B123
At your choice:
NOR
(Normal) The Hi Hat samples go directly into the VCA and
bypass the filter section.
FIL
(Filtered) The Hi Hat samples go first into the HH filter and
then into the VCA.
NOI
(Noise) Instead of samples white noise is led into the filter
and then goes into the VCA.
Low Pass Filter Cutoff
<CutLP>
<000-127>
On a value of <127> the low pass filter is maximum opened. At
lower values more high frequencies are filtered away (more dull).
Both filters form a band pass. Tweak both part filters to yield your
desired result.
Hello999 OOOHiHa PerfOO1
CutLPO79CutHPO13 Ed B123
» Note
: The hi hat filter only works when parameter
Source
has been set
to either FIL (Sample -> Filter) or NOI (Noise -> Filter).