download latest firmware for
RUNNING ORDER:
http://airways.endorphin.es
ENDORPHIN.ES® – RUNNING ORDER
Module design by Andreas Zhukovsky
Collection Spring/Summer 2021
Endorphin.es are made in Barcelona, Spain
Follow, like, post and tag us at instagram:
@endorphin.es
WARRANTY
RTFM – be so kind and read the manual. It will provide you with the information you need to fully indulge the module you justpurchased – for which we like to thank you.
Enjoy your sound experiences, dear sonic traveller. Beginning from the product's purchase date a 1-year warranty is guaranteed for each product in case of any manufacturing errors
or other functional deficiencies during runtime.
The warranty does not apply in case of:
• damage caused by misuse • mechanical damage arising from careless treatment (dropping, vigorous shaking, mishandling, etc.)
• damage caused by liquids or powders penetrating the device • heat damage caused by overexposure to sunlight or heating • electric damage caused by improper connecting
The warranty covers replacement or repair, as decided by us. Please contact us via email for a return authorization before sending anything. Shipping costs of sending a module back for
servicing is paid by the customer. Device complies with all EU regulations concerning RoHS lead-free manufacturing and WEEE disposal
Visit us:
http://endorphin.es
https://youtube.com/user/TheEndorphines
https://facebook.com/TheEndorphines
https://www.instagram.com/endorphin.es/
For technical requests: [email protected]
For general requests: [email protected]
FURTH BARCELONA, S.L.
VAT ID: ES B66836487
FIRMWARE UPDATE
Repeats I/II :
manual knobs
with CV inputs.
Set amount of active
trigger repeats or
Euclidean trigger fills
LISTEN TO THE HEART BEAT CAREFULLY
• 6 HP wide, 2-track trigger generator
• Zero-jitter clock generation: less than 50 microseconds internal clock jitter
• 101-style 16
th
note input mode (step/rest) with manual or CV controllable
amount of trigger repeats after the active trigger step happens.
• Euclidean mode enabled for each track, set total length and the number of fills
inside the Euclidean circle. Fill amount is also CV controllable.
• Individual reset inputs per track, reset for track 1 is normalled to reset of track 2
• Clock divider for incoming external clock allows to quickly obtain various
musical divisions on the fly incl. triplets of course, but more importantly tuplet
mode lets you stretch the desired amount of trigger repeats into a single bar.
• Dedicated mute buttons for each track
• 8 patterns of trigger sequences stored in the module and will be recalled on
each power cycle.
Depth: 30 mm (with plugged in ribbon cable)
Power requirements: +12V: 30 mA, -12V: 10 mA
red/brown pair of wires correspond
to negative -12V power connector
connect to the
power bus board
POWER CONNECTION
back side of the module
connect to the module
from the back side
-12V / red stripe
polarity marking
- If in live mode, the buttons
are individual Track I and II
MUTE buttons.
- If in step record mode,
the buttons are used for
adding steps and rests.
- If in Euclidean record mode,
the buttons set the length
of the Euclidean circle
(+1 step pressing STEP and
+16 steps by pressing REST)
Rate/divider knob:
- if no clock cable is inserted, then
this knob sets the speed of the internal
clock in BPM, from 30 to 300;
- if clock is inserted via cable, this knob
sets the speed of dividers/tuplets for
the repeats.
© Endorphin.es® 2011–2021
When a CV cable is inserted,
each Repeats knob acts as CV
attenuator; expected CV range: 0...+5V
power OFF you modular system:
hold STEP while powering your system again:
you will see the illuminati LED
slowly blink
BLUE
:
WAV
with simple mono or stereo cable connect
audio output from your computer headphones
output to REPEAT 1 CV IN input of the module
Press PLAY and wait 2+ minutes.
Illuminati LED will quickly blink
BLUE
.
The modue will reboot automatically blinking
FUCHSIA
LED after new firmware is installed
Disable alarms and notifications during
the update process as they will most likely
interupt the update procedure, flight mode
on phones is recommended.
When Illuminati LED flashes
RED
that means signal is too low or too high:
Just reset the firmware update process by
pressing
REST
once and regulating the signal level
with
RATE
knob: full CCW: 1x amplification,
full CW: 10x amplification).
Video update guide:
https://youtu.be/WKt7FdRGRYI
External clock
input, 16
th
notes clock
expected
(PPQN24÷6)
(0...+5V or +10V,
0.65V threshold)
Reset/syncronization trigger inputs.
Each trigger applied resets a certain track’s
sequence to its first step.
‘Reset in I’ is normalled to ‘reset in II’, if no
cable is inserted into ‘reset in II’.
Track selector switch:
- record a trigger sequence or set
the Euclidean length by switching
to the left (track I) or right (track II);
- playback live mode in the middle
Output
Output
Output
track I and II trigger outputs,
trigger output length: 10 msec
Output range: 0...+10V
LED indicator:
- blinking to BPM in blue in live mode;
- lights up red in step recording,
- fuchsia in euclidean recording
Clock output:
- internal clock out jack: 30...300 BPM in 16
th
notes
(PPQN24÷6) when no external clock applied;
- external clock output in 16
th
notes after divider;
Output range 0...+10V
Output
Output
