XBASE 999 Operating Manual
73
Defining Loops
Instead of having a song with start and end you can also define a
song with a start and an infinite loop with free loop points at your
choice.
Edit the song in stopped mode as described in Song Mode Manual
Editing.
Choose the Song Step where the loop should start, which is mostly
the song end.
Move the cursor to Repeats
Rp
XXX and lower the value to 0
(<StpFIN> appears right of it) and then turn it once again left until
<LOP> appears. The display
Stp
shows again the current Song Step.
Init Kit O92Kick SongOO1
Pa002 Te123 RpLOP StpO19
Now press the
(Write)
button to enter the Song Write Mode. Now
you move the cursor right to the step selection and adjust the desired
loop point to which the loop should jump to after reaching the
endpoint. Because this has to be less or equal to the endpoint (right
limit of time axis), you can only adjust values smaller than the
current Song Step.
Init Kit O92Kick SongOO1
Pa002 Te123 RpLOP StpO19
Don’t forget to leave Write Mode again after editing.
If you now play back this song, it is not finished automatically, but
endlessly jumps back to the programmed loop start after reaching the
loop point. This is a very useful function for live perfomances.
