XBase 09 Operating Manual
Page 29
6.4.12 Track Page
The Track Page contents three further sequencertracks. Their data is sended out via Midi-Out
socket to control external Midi-soundgenerators directly from XBase09 internal sequencer.
Every track can have its individual Midi-channel. Notenumber and -length is adjustable for
every single step. Even accent-setting is possible.
So up to three different melodielines or chords up to three notes can be programmed.
Programming the steps is the same procedure like programming drumtracks, described in
Pattern- Mode ( chapter 6.3, P.18).
When sequencertracks are added to existing drumpatterns, the drumpatterns will not be
changed in any way.
To edit Midichannel, Notenumber and -length, the first four knobs of every instrument-section
(BD, SD, HH) have a ‘page two’-function :
1.
Tune = Note
2. Pitch = Octave
3. Decay = Midichannel
4. Harmonics = Notelength
The knobs of Snaredrum- and HiHatsection are changing in the equal way.
Now, we describe the programming procedure of a sequencertrack :
hit PATT button
patternmode active
LED ligths up
hit UP/DOWN or 1-16 buttons
choose pattern
display shows patternnumber
hit SHIFT,then TRACKPAGE button
sequencer active
display shows ‘
trC
’ for ‘track’
hit WRITE button
sequencer ‘sharp’
LED ligths up
hit INSTRUMENT-button
select track BD=1,SD=2,CH=3
LED lights up
move knob 3
select midichannel
display shows midich.-number
move knob 4
select notelength
display shows ‘
Stac
‘ or ‘
Leg
‘
-
Stac
cato: every step is triggert
-
Leg
ato: following steps are connected
hit STRART button
sequenzer started
set steps
described in
chapter 6.3 P.18
U
se Induvidual
Step Mode (6.3.1)
to assign different notes to individual steps.
Use Track
Record Mode (6.3.2 )
to assign same note to all steps. By moving knobs
1 and 2 , you can change your melodies in realtime. To get ‘musical’ results this way,
you might need some practice.
move knob 1 and 2
assign notes and octave
display shows note and trackno.
when sequencer is running and
reaching a step
‘ E - 1’
Happy with your first track ???
hit WRITE button
Trk.Rec.Mode
off
LED stops flashing
hit WRITE, then INSTRUMENTbutt. select next track
move knob 3
select midichannel
and so on... programm new track like above .
Happy with all your tracks ???
hit ENTER button
pattern is stored, RampPage left
