Manual
9. Use the
(Soft-Button) < Ctrl >
to select one out of the four controller paths. In this example,
we’ll use the default setting
< 001 >.
10.The
(Soft-Controller) < Ctrl >
can now be used to select the entry ‘Aftertouch’
< AFTRT >.
11.Turn
(Soft-Controller) < Dest >
to select the destination of the Routing Amount of the
selected Routing Element. Because Routing Element 1 is used for the modulation in this
example, select the entry
< R1AMT >.
12.Use
(Soft-Controller) < AMT >
to adjust the ‘Controller Amount’. It’s added to the Routing
Amount. This way, you set the effect aftertouch has on the tremolo.
• positive value: the higher the aftertouch, the more intense the tremolo will be
• negative value: the higher the aftertouch, the less intense the tremolo will be.
The higher the value of the controller amount, the more effect the aftertouch will have on
the Controller Amount and the more intense the tremolo will be. Select several positive and
negative values to try out the possibilities.
13.Now the
(Soft-Controller) < Curve >
can be used to set the curve. The settings will create a
different Ñfeel“ when playing the keys.
We’ve now created the effect we wanted: the tremolo intensity is controlled by aftertouch.
Now you can add more modulation paths to this. An example could be to make velocity also
control the intensity of the filter tremolo.
14.Press the
(Exit/Cancel)
-button.
You’re now back in the submenu of the edit menu.
15. Press the
(Soft-Button) < Veloc >
You’re now in the menu level where velocity can be assigned.
16.Use the
(Soft-Controller) < VelNo >
to select one out of eight possible velocity mappings
(all 8 are availavble at the same time). In this example, we’ll use standard setting
< 001 >.
17.You can now use
(Soft-Controller) < Dest >
to select one out of the 32 possible destinations.
To select the Routing Amount of the first Routing Element, we select once again
< R1 Amt >.
At this point, you could also make velocity control a parameter like filter cutoff by selecting
the entry
< CUTOF >
in the destination list. Or you could use a second velocity path etc.
Routing Elements
3-10
053
Single Mode
thebook-all 07.11.2002 18:28 Uhr Seite 53 (Schwarz Bogen)
