2.3 operation instruction
2.3.1
3.0
Unload, Transportation and Storage
2.2.2
2.3.2
2.3.3
2.3.4
2.2.3
2.2.4
2.2.5
4
Jolywood (Taizhou) Solar Technology Co.,Ltd.
Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China
www.jolywood.cn
+86-523-8061 2361
Installation Manual
- Jolywood N-type Mono-crystalline Double Glass Module
It is strictly forbidden to use modules with broken
glass. Damaged modules must not be repaired.
Contact with the surface of the modules may
cause electric shock. Do not disassemble the
module or remove any part of the module. Do not
artificially gather sunlight on these solar modules.
In order to avoid damage module, please do not
scratch or hit module, and do not use paint or
adhesive on the front or back side of module. In
order to ensure insulation performance of
modules from be damaged, please avoid
scratching, cutting the cables and connectors or
exposed under the sun for a long time. Do not
drop module or drop other things onto the
module surface. Do not place any heavy or sharp
objects on the module surface.
The operator of the system requires relevant
professional knowledge, and the system must be
installed and maintained by qualified person with
professional knowledge. Persons without
authorization and relevant training should not
touch modules and approach the installation area
or module storage area.
Do not connect the positive terminal of a single
module to the positive terminal of another
module. Please make sure that the polarity of
each module or module string is not opposite to
other modules or module strings. Please make
sure that there are no gaps between the insulating
washers of the joint. If there are gaps between the
insulating washers, it may cause the risk of fire or
electric shock.
According to the requirements of the National
Electrical Code, the maximum system voltage
should not exceed 1500V.
Please do not use water to extinguish fire when
the power is on.
It is forbidden to climb, step on, stand, walk or
jump directly on the package or module.
Preventive measures and general safety rules:
Modules should be stored in the original box
before installation. Please protect the package
from be damaged. Transport or unpack modules
Only work in a dry environment, and only use dry
tools. Do not work in a humid environment
without wearing any protective measures. When
exposed under the sun, no matter whether
module is connected or not, please do not directly
touch junction box, connector, cable or other
charged objects of module without any
protection.
Do not install module when the module is wet or
windy.
