ENGLISH
CHAP.03 OPERATING MODE
03.1
APPLIANCE OPERATIONS
When the appliance is OFF, press and hold down Key
3
on the remote control for several seconds to turn it on. Next, the message ON
will appear on the display indicating that the switch-on procedure has started made up of various phases defined in technical parameter
settings set by a specialised Technical Service Center. After the normal switch-on time, the device normally reaches the WORK condition
at the set output unless fume temperature reaches the minimum admitted value and the relevant alarm message is displayed. The
WORK message informs the user that the stove is in “OPERATING MODE” i.e. it has reached the preset heating output level. The stove
operating level is set using button 5 and increasing or decreasing the value displayed with keys 1 or 2. There are 5 heat output levels.
The ambient temperature can be SET pressing button 4, then keys 1 and 2 to adjust the temperature to the desired value.
The stove remains in operating mode; i.e. at the heat output level, until the set ambient temperature is exceeded by 0.5°C, a condition
required to trigger the ECO function. To restart the heating mode, the ambient temperature must decrease to 1.0°C below the SET
temperature.
The fan speed for the hot air exhausted through the grid depends on the output levels; the higher the output level, the faster the air will
be pumped through the front grid.
If STAND-BY mode is on, the device turns off after a period of time in economy mode or after this condition led to a certain increase in
the reference temperature. The length of this period and the temperature increase can be set in MENU 5 – STAND BY.
In STAND-BY mode, the stove automatically turns back on when the reference temperature drops under the set value. To manually turn
off the stove, simply press and hold down Key
3
for several seconds. Next, FINAL CLEANING is run.
03.2
REMOTE CONTROL USE AS A PROBE
When the specific remote control wall mount is installed in the centre of the room, the remote can be used as a traditional thermostat,
setting REMCONTR probe type in MENU 4.
According to the domestic structure the range of action of the remote control is about 7 metres.
11
