18
AIS CONFIDENTIAL
After calibration is complete, press
Save to complete the camera
calibration
Figure 3.7 Camera calibration
3.8 Print Position Correction (Before performing this correction, please
complete the camera calibration in section 3.7)
When the nail print is found to be too different from the position specified by
the nail app, you can refer to this chapter to correct the print position.
i. Prepare a piece of printing paper that is 2.5 cm wide and 4 cm long
ii. Adhere the printing paper to the nail holder with double-sided tape
iii. Open the front cover, put the nail holder into the nail machine and press
the fixed platform to move it to the print position.
iv. Open the Nail App, select System Management-> Print Position Calibration
v. A test draft will appear on the screen. Do not move the test draft.
vi. Press the print button on the right side of the screen. Do not move the nail
holder after printing.
1.
甲片固定座上緣
對齊螢幕上緣
2.
校準豎線對齊
甲片固定座中心
攝像頭顯示移動選項
