Jolimark DS-250, User Manual

Page: 3 / 38

User’s Manual
ii
Safety Instructions of Lamp
This projector utilizes an OSRAM
®
pressurized mercury lamp. The lamp will be
very hot and bright when it is working.
‰
Do not open the lamp cover when the product is projecting.
‰
Do not knock, press or violently touch the lamp, it may cause the lamp ballast
breaking.
‰
To replace the lamp, first turn off the projector, and unplug the power cable. If the
lamp is just turned off, to avoid injuries, wait for 15 to 60 minutes until the lamp has
fully cooled down, then open the lamp cover to replace the lamp. Refer to “Replacing
the Lamp” on Page 23 for details.
‰
If the lamp bursts, the mercury inside the lamp will go out of the projector. Leave the
area immediately if the lamp scatters while being operated and ventilate the area for
at least 30 minutes. Otherwise it could be harmful to user’s health. In such a case, it
is recommended you contact our sales service personnel, do not clean up the glass
particles yourself.
‰
Do not look into the lens while the lamp lighting. It would damage your eyes.
‰
Because failure lamp contains mercury, when you want to dispose the failure lamp,
please contact our sales service personnel for recycling. Or dispose of in accordance
with local, state or federal laws.
Notes:
• This manual is subject to change without notice.
• All the parts of this product are recyclable. When you dispose of this product, please
contact the Jolimark service center or your local dealer to recycle without any paying.