Jolimark DS-250, User Manual

Page: 25 / 38

User’s Manual
19
“Language” Menu
Sub Menu Function Default
English Set the OSD language to English. -
中文
Set the OSD language to Chinese. -
“Advanced” Menu
Sub Menu Function Default
No Signal Power Off
When this option is selected you can enable the projector to
automatically turn off (at the selected time: 3,6,9,12 min.) if
there is no signal received by any input.
OFF
Auto Power Off
If no operation is performed for specific period of time, the
projector automatically turn off.
OFF
Low Consume Mode
Use this function to dim the projector lamp light output which
will lower power consumption and increase lamp life.
Do not switch between the normal mode and the low consume
mode frequently, for this will decrease the lamp life.
OFF
Gamma Select the desired gamma position. RGB
Auto Source Select Automatically scan the input source. OFF
Rear
Flip the projection image horizontally. Use the function while
projecting images from behind a translucent screen.
OFF
Ceiling
Flip the projection image vertically. Use the function while
suspending the projector from the ceiling and projecting images
from front of the screen.
OFF
Factory Reset Reset all items in all menus to their default settings. -
Lamp Reset
Clear the cumulative lamp hours use time, and return it to “0”.
Reset it when you had just replaced the lamp.
-