Jole stages ISOFIX I1507, Instruction Manual

Page: 24 / 33

45 46
Installing the stages™ isofix seat
in the Base
see images
14
-
38
Baby Mode (Rearward Facing Mode)
Rearward Facing Newborn - 4 years old
Recline position
Limit to use the first position
!
Please install the base on the vehicle seat (with rebound bar
attached), then install the shell, and then put the child in the stages™
isofix.
!
Ensure rebound bar is fitted to base.
!
The most convenient way to install the shell is when the base is in
the 7
th
position.
14
1
2
!
Pull up on the stages™ isofix seat
to be sure it is securely latched into
the base.
!
Please ensure that there is no gap
between the vehicle seat upper
surface and the bottom of the
base.
!
Make sure to open the side impact
protection shield for more side
impact safety.
14
-1 The side impact
shield opposite the vehicle door can
be closed to allow more seating
space.
14
-2
15
1
If the stages™ isofix is secure, the
stages™ isofix latched indicator
shows green. If the stages™ isofix is
not secure, the stages™ isofix shows
red.
15
-1
16
1. Infant insert is for children's
protection. Child 0-6 months must
use the full insert.
2. Infant insert includes head support
and body portion and wedge.
3. Please install the base on
the vehicle seat, then install
the shell, and then put the child in
the stages™ isofix.
4. After the child is placed into the
seat, check whether the shoulder
harnesses are at correct from
proper height.
5. Please make sure the infant insert
has the wedge assembled before
using it for infant.
16
6. Detach the snaps on the head
support, and then remove the infant
insert. Please refer to (Use Infant
Insert). To assemble head support
in reverse steps.
17
7. After removing the wedge from
the infant insert, please store it in
a place where the child can not
access it.
17